LocationColumbus, GA 31907 Call(760) 589-8148

Common Causes of Paving Repair

Four Threats to a Driveway You Should Know About

Over time, driveways wear out, which is a problem for many homeowners and business owners. Experiencing wear and tear is inevitable. However, the majority of this deterioration is caused by a small number of driveway threats that can significantly reduce the life expectancy of your parking lot, path, or anything else constructed from concrete or asphalt. To avoid the constant need for paving repair, know some of these threats:

Small Cracks

Cracks in your driveway’s surface might seem like a minor issue at first. However, these can rapidly expand, allowing other driveway dangers to causing even more damage to your driveway. A microfracture in your driveway, for instance, might not look like much from the outside, but it actually extends deep enough into the material to let water in. It can quickly eat away at your driveway’s substance.

The Weather

The elements of nature are another common enemy of driveways. Your driveway could be damaged by the sun, rain, snow, and even haze. They are a potential time bomb that could set off a chain reaction of issues that you will have to address. Therefore, it is essential to know how to protect your driveway from specific types of weather.

Leakage of Fluids

Liquids of various types can seep into or sit dormant on your driveway, and eventually become a problem. Water is the most prevalent fluid on Earth. Without you even noticing, it can quickly deteriorate your driveway. In addition to water, oil is another liquid to watch out for because of the damage it can do to an asphalt driveway. Sugary drinks should also be avoided because they attract pests and insects that can then burrow into the weakened pavement.

Did one of these threats cause damage to your driveway? Perhaps just need more tips to avoid issues? In Columbus, GA, Flatline Striping LLC is the paving repair expert your can trust for quality recommendations and solutions. Dial (760) 589-8148 now for an appointment.

3 Important Asphalt Sealcoating Guidelines

Sealcoating Guide for You!

Professional asphalt sealcoating contractors are thoroughly trained in their high-quality service. You can always count on them if you are not sure how to do it or if you cannot do it on your own. If the space receives too much asphalt, the coating can become too thick and result in more damage than if it was thin. Thinner coatings are better at moving air, which reduces the chances of traffic forming ruts. If ruts do form after the coating has been applied, you can fix them by adding another coat. Here are 3 important guidelines you need to know with sealcoating:

Required Number of Coats

Professional contractors usually apply two to three coats of asphalt to provide long-lasting protection. However, there is no set rule for applying more coats, as this is always case-by-case, even with the same asphalt product. The amount of asphalt placed on the surface also depends on the temperature, humidity, and shade of the day. The smoother and cleaner the surface is to start with, the fewer coats you will need!

The Surface should be Cleaned First

Floors should always be clean and free of liquids when sealcoating is applied. It is not a good idea to apply sealcoating on wet surfaces or on surfaces where there is standing water. Ruts form when the sealcoating is applied on wet surfaces. Therefore, the wet asphalt should be dry before the sealcoating is applied.

The Use of Brushes and Paint Rollers

Professional contractors often use 10-inch-wide brushes and paint rollers during sealcoating. The latter is preferred for applying sealcoating because they are easier to remove than the former. Most asphalt sealcoating contractors will use a pair of paint rollers, using the first roller with the second one when the first one is covered with asphalt. If a contractor uses latex paint, make sure it is highly water-resistant. Many contractors use Kilz primer, which you can check by putting a small bit on the tip of your tongue. If it tastes bad, it is probably not latex-based.

For information about the Flatline Striping LLC asphalt sealcoating services offered, please do not hesitate to dial this number (760) 589-8148 now, we are based in the Columbus, GA area.

Things to Do to Find a Paving Contractor

Tips on Choosing a Professional Paving Contractor

 

Hiring the right contractor is one of the most important aspects of any services. If you are in need of any paving services, you should choose the paving contractor well. You would want to put your investment in the right hands. Below are tips on how to choose a professional paving contractor.

 

Start looking for paving contractors that are in your locality. The closer you are to the contractor, the better for you to work together. Since they are from your place, they know the type of soil in your place. This is very important since the subgrade has to be considered when paving. For the asphalt to last long, it has to be installed on the right subgrade.

 

Check the Yellow Pages and the Internet to look for different paving contractors. Get their contact information so you would be able to contact them. Ask for your family and friends if they know of any paving contractor. Getting referrals from the people you know is a great way to find a professional paving contractor.

 

Set a schedule for you to interview the paving contractors you have found in your search. Interview 3 to 5 paving contractors for you to have enough choices. If you interview too many contractors, it would take a lot of your time and the choices might overwhelm you. Visit them at their office so you will be able to check their portfolio. Being able to see their previous work will help you choose the right paving contractor, too.

 

Ask the paving contractors for an estimate on your paving project. Do not trust contractors that offer very low estimates. Either they cut corners or you would be surprised at the other charges they will make you pay.

 

Ask for the contractor’s references. Being able to talk to people who have experienced their services would help you decide on which paving contractor to hire.

If you are looking for a professional paving contractor for your asphalt paving project in your home in Columbus, GA, you can rely on Flatline Striping LLC.

Different Types of Asphalt Mix to Choose From

Choosing the Right Asphalt Mix for the Asphalt Paving Service

With proper maintenance and immediate repairs, asphalt would last for a decade or so. When hiring an asphalt paving service, one thing you need to tackle is the materials you will be using for the asphalt paving. They must know what type of asphalt mix to use for your home’s pavement or walkway. Below are the different types of asphalt mix.

Stone Matrix Asphalt

This type of asphalt mix is pretty expensive, but the price comes with great benefits. It has more asphalt content compared to other types of mix. They are popularly used in big projects with heavy vehicle traffic. They can last for a long time amidst the number of vehicles traveling on it and the weather it has to endure. Most asphalted roads use this type of asphalt mix. Even if you are only using it for your driveway, it is still a great investment. They keep your car safe even if you have a sloping driveway because of its friction capacity.

Dense-Graded Mix

This type of asphalt mix has other varieties: the fine-graded and coarse-graded mix. The asphalt paving service provider would be able to help you to choose the right grade for the subgrade that you have on your property. The grade of the asphalt mix would also depend on the weather condition in your place. If you are in a place where it rains a lot, this would be the right asphalt mix for you. Since it is water-resistant, water would not go to the subgrade.

Open-Graded Mix

If the subgrade on your property is compact, this is the right asphalt mix for your property. This asphalt mix has large voids on it that allow water to seep through the subgrade. Motorists will be safe driving on this asphalt mix because water would not stay on top of the asphalt. This type of asphalt mix is quite expensive, but the installation process is not that expensive anymore. This type of asphalt mix needs high maintenance though. If the pores on the asphalt are clogged or sealed, it will reduce its stability.

An asphalt paving contractor will be able to help you choose the right asphalt mix. For a reliable asphalt paving service in Columbus, GA, come to Flatline Striping LLC.

What Should an Asphalt Paving Contractor Have

Tips for Finding the Right Asphalt Paving Contractor

 

One of the great ways to improve your home’s exterior is asphalt paving. You can have the driveway or walkway paved with asphalt. In order for you to have a well-installed asphalt, you have to choose the right asphalt paving contractor. Here are some tips for finding the right contractor to install the asphalt:

Asphalt paving is no easy task. There are a lot of things to consider to properly install the asphalt. These things are learned through proper training and experience. You have to choose a contractor that has years of experience in the industry. The longer they are in the industry, the more experience they have. They have a reputation to keep as well. They will not mess up with their service to keep the reputation they have built.

There are big tools and equipment needed for asphalt paving. For the asphalt specialist to work efficiently, they must have all these tools and equipment. The asphalt paving contractor must own all these. Renting them might cause delays to the project since they have to wait for them to be available. See to it their tools and equipment are not damaged and old. A contractor must be willing to invest in their tools and equipment since they play a great role in the success of their services.

Depending on how big the asphalt paving you are having, the contractor must be able to send enough number of specialists. They must be well-trained and have years of experience in asphalt paving. The contractor must train their specialist so they will know the latest trend in asphalt paving. Work will be easier for them if they are capable of handling new tools and equipment. They would also be able to produce better-quality results.

An asphalt paving contractor should be able to assure you that they will be able to provide a lasting result with their services. With their experience in the industry, they should know the ins and outs of asphalt paving. Interview several contractors before hiring their services. If you are in Columbus, GA, you can consider the asphalt paving service of Flatline Striping LLC.

How to Hire a Paver in Your Area

Tips for Hiring a Local Paving Contractor

 

A decorative driveway or walkway can be a valuable addition to any property. This is especially if the pavement has been built and maintained by a local paving contractor. It can be daunting to look for one as pavement projects are expensive. In this article, you will read some tips on how to hire the right paver near you:

  • Research Contractors – It helps to know more about the paving contractors near your area. There are some who can only work with asphalt or concrete materials. Others may provide their services for residential or commercial clients. One way of finding potential contractors is by asking those close to you. You may have a family member, neighbor, or close friend that knows or has worked with a contractor in the past.
  • Inquire Credentials – When contacting a potential contractor, you should inquire their complete credentials. A credible paver must have the right licenses and certifications for their services. They acquire these credentials through hours of learning and applying trade methods within industry standards. They do so to ensure proper and precise pavement work while following client project details.
  • Insurance – It is also recommended to look for an insured paving contractor. Even with proper safety measures, accidents can happen throughout paving work. You should ask the contractor about their insurance coverage. Some can shoulder property damage while others can compensate worker injuries.
  • Ask References – You should also ask the paving contractor about their previous client references. Contacting the latest ones can help you determine how the paver provides their services. If possible, visit project site locations to see their workmanship with your own eyes.
  • Get Estimates – Another hiring tip is to get estimates from three or more paving contractors near your area. You will have to look for one that offers the most reasonable estimate. While location can affect travel costs, you should also factor materials, experience, and work attitude.

If you are looking for a local paving contractor for your project in Columbus, GA, turn to Flatline Striping LLC. They provide asphalt paving, striping, sealcoating, and other related services. You can dial (760) 589-8148 to book or further inquire their asphalt services.

How to Fix Parking Lot Asphalt Issues on a Budget

Cost-Efficient Asphalt Repair Solutions

 

If you are a local retailer who has built a parking lot in front of his shop or warehouse, you will have to take care of its maintenance sooner or later. If you have primarily invested in sealcoating when the parking space was built, you may have delayed the need for an asphalt repair but even then after maximum 10 years of exploitation, you would have needed some professional renovations. That comes as a result of the fact that parking lots are used commonly.  

 

But what happens when the asphalt in front of your working place starts cracking and discoloring? Isn’t that the worst advertising of your business? A prosperous company should always provide safe access to its office or shop and make a good first impression on its potential customers.

 

If you want to take some action but you do not have the necessary funding for a complete asphalt replacement, you may prefer to take advantage of a service called asphalt patching. It effectively covers flaws like asphalt cracks and potholes and can be performed for less than a day. The only thing that you will have to take care of is finding a reliable local asphalt repair company that possesses all the necessary technical expertise, equipment and materials to get the job done right. Beware that cold patch fillers are usually aimed at DIY enthusiasts while professional contractors prefer the hot ones, simply because they provide longer lasting results.

 

Sealing an asphalt surface to enhance its strength may not seem complicated but it’s definitely not a monkey business. If you want to make sure that it is done right and within the time frame that you have, then you’d better refer to an expert asphalt repair contractor like Flatline Striping LLC. We serve the community of Columbus, GA. If you don’t want to close your business for more than a day just to get your parking lot repaired simply call (760) 589-8148 and discuss your issues with our team. We will be glad to advise you and send our crew to inspect the site that needs to get patched.

Frequently Asked Questions by People Who Pave Their Driveway with Asphalt for the First Time

Answers by an Experienced Paving Contractor on How to Build a Nice Driveway

 

Although there are different types of pavement that you might be interested to learn more about, our team has decided to focus on asphalt pavement in this post. What is asphalt pavement? It’s basically the name that your paving contractor would use to call a paved road surfaced with asphalt.

  • What does the hot asphalt mixture consist of?

It combines 95% sand, stone, or gravel together with 5% of asphalt cement which is a crude oil product. The asphalt cement is the aggregate that is actually heated with the aid of specialty equipment when laid on top of all the asphalt mixture ingredients.

  • What is the temperature that asphalt can be heated up to?

This aggregate melts at approximately 270 °F. But this temperature value may vary from 200 °F for asphalt cement to 300 °F for virgin asphalt and 330 °F for the polymer-modified one.

  • How long does it take for a freshly paved driveway to get ready for exploitation?

This actually depends on the weather conditions determined by the season. On hot and humid summer days that would be 4. But if the temperature is less than 90 °F, then 2 days are more than enough for the asphalt to cool and dry off.

  • Why is asphalt preferred over concrete?

There is not only a single answer to that question. There are quite a few reasons, actually. The most obvious one is because of the price that has to be paid for its installation. Needless to say, it is way cheaper. Another popular reason is safety. Every experienced paving contractor knows that asphalt is a better solution against snow and skidding.

  • Is asphalt toxic or hazardous?

Toxic fumes are generated only during the installation of hot asphalt. That’s why people working with it are wearing protective equipment. It is not considered a hazardous waste and the old one it is often recycled into new asphalt pavements.  

You still have questions? Call (760) 589-8148 to get your free answers from the paving specialists at Flatline Striping LLC. As a leading paving contractor in Columbus, GA we have all the replies that you need.

Increase the Durability of Your Surface

Aspects of a Professional Asphalt Contractor

If you are in need of an asphalt contractor, you have to confirm first the reliability of the contractor to hire. Hire one who is familiar with any paving project you are planning to have. Be it your driveway or your parking lot, you have to check every experience and reference when hiring the company. Here are some of those aspects you need to know!

  1. Experience

    A company with notable years of paving experience. Choose one with a team of experts knowledgeable in handling asphalt for any particular site or weather conditions. Make sure you partner with a company that provides help in seal coating, concrete, clear coating, asphalt stripes, patching, resurfacing and more. This is for commercial or residential property owners. Also, choose the reliable company who has this history of providing various services you need, especially those that will help you prepare for the weather changes in your area.

  2. Know How

    An asphalt contractor knows how to assist you with your paving needs. If your driveway surface has cracks, a proper seal coating is needed. Doing the job on your own is extremely impossible. So, it is wise to hire a contractor with the knowledge of how to appropriately, efficiently and effectively do the job.

  3. Perks

    Installing asphalt is a tough task. It needs a professional asphalt contractor for a solid work. Choosing the best can provide you a quality asphalt paving outcome. Also, having a durable asphalt installation can guarantee you a long lasting driveway or parking lot surface. With the quality service, you can save time, money, effort, and, most importantly, the value of your property.

Improving property is a way of increasing its value. Flatline Striping LLC is the asphalt company who can provide you quality service for your project. We have been in the business for over 20 years already, and we are proud to serve more customers in [ln]. For more information about our services, contact us at (760) 589-8148. We will be happy to answer you!

Why You Need a Professional for Your Pavement Installation

Benefits of Hiring a Professional Paving Contractor

 

Whether you own a home or a business, a pavement is a construct you can definitely make use of. A paving contractor creates a hard surface that allows smooth traffic for vehicles to foot traffic. This what we call a pavement. But more than that, a pavement is a convenience. That’s why most prefer a home or business with a paved parking lot or driveway than one without.

 

Pavement construction isn’t an easy task. It needs experience and expertise to get results that one could take advantage of. For this reason, it’s best to hire a professional paving contractor for the task. If you’re convinced, here are more reasons why you should consider hiring a professional for your driveway, parking lot, or pathway:

 

As a home or business owner, you have other appointments that need your attention. For one, you may need to take your kids to school or perhaps train your employees. No matter the case, there are many things that are contending to get your attention. And you don’t want to add a project such as paving to that list. Hiring a professional ensures that you won’t have to worry about your pavement installation.

 

Professionals make sure to be thorough in their preparation. They check beforehand if you have a proper drainage system so there won’t be any problems during the installation. Furthermore, they add a stable sub-base before pouring any pavement. This attention to detail isn’t something most can handle, especially an amateur. Having a competent and experienced paving contractor for your project can help you expect nothing but quality results.

 

Pavement construction is a dangerous endeavor. As such, there are risks for damage to a neighboring property or even to passersby. And the last thing you need is additional expenses. Knowing this, you need to consider hiring a professional since they are insured. A contractor who is insured ensures less liability on your part, reducing potential financial risks.

 

When in need of a reliable paving contractor in Columbus, GA for installations, contact Flatline Striping LLC now! They offer impeccable services and affordable rates. Dial (760) 589-8148 now to learn more!